Type 100 is single coil spring seal which designed with a drive ring  and washer  that remove the slippage, protecting the shaft and sleeve from wear and over-stressing of the rubbel bellows. Used in all kinds of rotary shaft equipment : pumps, mixers, blenders, agitators and compressors. Used in paper, Pertochemical, food processing application, covering a wide range of sevice condition from water to steam to chemicals and corrosive materials.

TYPE  100
Operation Limit
Tempeature : - 40℃~+200℃
Pressure : up to 1200 PSI
Speed : up to 3600 FPM

Standard material
P/N Description Material
1 CUP NBR
2 SEAT CERAMIC
3 SEAL FACE CARBON
4 BELLOWS NBR
5 WASHER S.S. 304
6 CASE S.S. 304
7 DRIVE RING S.S. 304
8 SPRING  S.S. 304
9 SPRING HOLDER S.S. 304
TYPE  100

Dimensions in inch
SHAFT SIZE  D ±0.001 B C E F STUFFING BOX:G L±0.012
3/8" 0.875 0.57 0.25 0.31 0.50 1.06 1.50
1/2" 1.000 0.69 0.25 0.31 0.63 1.06 1.50
5/8" 1.250 0.81 0.35 0.41 0.75 1.34 1.72
11/16" 1.312 0.86 0.35 0.41 0.81 1.41 1.72
3/4" 1.375 0.94 0.35 0.41 0.88 1.47 1.72
13/16" 1.437 1.00 0.35 0.41 0.94 1.56 1.79
7/8" 1.500 1.06 0.35 0.41 1.00 1.66 1.79
15/16" 1.562 1.12 0.38 0.44 1.06 1.69 2.00
1" 1.625 1.19 0.38 0.44 1.13 1.75 2.00
1.1/16" 1.687 1.25 0.38 0.44 1.19 1.81 2.07
1.1/8" 1.750 1.31 0.38 0.44 1.25 1.88 2.07
1.3/16" 1.812 1.37 0.38 0.44 1.31 1.94 2.07
1.1/4" 1.875 1.44 0.38 0.44 1.38 2.00 2.07
1.3/8" 2.000 1.56 0.38 0.44 1.5 2.13 2.13
1.7/16" 2.062 1.62 0.38 0.44 1.56 2.19 2.13
1.1/2" 2.125 1.69 0.38 0.44 1.63 2.25 2.13
1.5/8" 2.375 1.81 0.44 0.50 1.75 2.50 2.50
1.3/4" 2.500 1.94 0.44 0.50 1.88 2.63 2.50
1.7/8" 2.625 2.06 0.44 0.50 2.00 2.75 2.63
1.15/16" 2.687 2.12 0.44 0.50 2.06 2.81 2.63
2" 2.750 2.19 0.44 0.50 2.13 2.94 2.63

Copyright 2002 ASIA M-SEAL CORP. Web site designed and hosted by Taiwan Products Online