Type 200 is single coil spring seal which designed with a drive ring and washer that remove the slippage, protecting the shaft and sleeve from wear and over-stressing of the rubbel bellows. Used in all kinds of rotary shaft equipment : pumps, mixers, blenders, agitators and compressors. Used in paper, Pertochemical, food processing application, covering a wide range of sevice condition from water to steam to chemicals and corrosive materials.

TYPE  200
Operation Limit
Tempeature : - 40℃~+200℃
Pressure : up to 1200 PSI
Speed : up to 3600 FPM

Standard material
P/N Description Material
1 CUP NBR
2 SEAT CERAMIC
3 SEAL FACE CARBON
4 BELLOWS NBR
5 WASHER S.S. 304
6 CASE S.S. 304
7 DRIVE RING S.S. 304
8 SPRING  S.S. 304
9 SPRING HOLDER S.S. 304
TYPE  200

Dimensions in inch
SHAFT SIZE  D A±0.001 B C E F STUFFING
BOX:G		 L±0.012
3/8" 0.875 0.57 0.25 0.31 0.50 1.22 1.12
1/2" 1.000 0.69 0.25 0.31 0.63 1.37 1.12
5/8" 1.250 0.81 0.35 0.41 0.75 1.56 1.29
11/16" 1.312 0.86 0.35 0.41 0.81 1.62 1.29
3/4" 1.375 0.94 0.35 0.41 0.88 1.69 1.29
13/16" 1.437 1.00 0.35 0.41 0.94 1.75 1.29
7/8" 1.500 1.06 0.35 0.41 1.00 1.81 1.35
15/16" 1.562 1.12 0.38 0.44 1.06 1.94 1.38
1" 1.625 1.19 0.38 0.44 1.13 2.00 1.38
1.1/16" 1.687 1.25 0.38 0.44 1.19 2.06 1.38
1.1/8" 1.750 1.31 0.38 0.44 1.25 2.13 1.50
1.3/16" 1.812 1.37 0.38 0.44 1.31 2.19 1.50
1.1/4" 1.875 1.44 0.38 0.44 1.38 2.25 1.50
1.3/8" 2.000 1.56 0.38 0.44 1.50 2.44 1.56
1.7/16" 2.062 1.62 0.38 0.44 1.56 2.50 1.56
1.1/2" 2.125 1.69 0.38 0.44 1.63 2.56 1.56
1.5/8" 2.375 1.81 0.44 0.50 1.75 2.94 1.87
1.3/4" 2.500 1.94 0.44 0.50 1.88 3.06 1.87
1.7/8" 2.625 2.06 0.44 0.50 2.00 3.19 2.00
1.15/16" 2.687 2.12 0.44 0.50 2.06 3.25 2.00
2" 2.750 2.19 0.44 0.50 2.13 3.31 2.00

Copyright 2002 ASIA M-SEAL CORP. Web site designed and hosted by Taiwan Products Online